Jump to content
Sign in to follow this  
Χρήστος Λάππας

25 Tips To Carve A Ski

Recommended Posts




25 Tips to Carve a Ski
SKI Magazine Editor/30 Ιανουαρίου 2016 - 5:13:43 πμ EET





3 reflips2 likesLeave a comment



Share on









ski0116_carve1c.jpg


Photo by: Keri Bascetta


The One Ski Skill You Need
Who cares if you can’t carve a turn—that
is, tip a ski on edge, bend it, and ride it through an unskidded arc, leaving a clean, curved trench behind in the snow? Skiing down mountains is still the coolest thing ever invented, even if you skid every turn.

But fewer than one in 10 of us, our snow pros said. And a lot of us think we’re carving, they said, but aren’t. So let’s fix it. Our PSIA instructors offer their best guidance for helping you finally tip and rip, as well as some general thoughts on carving.








20150313-skitest-320.jpg


Photo by: Keri Bascetta


Michael Iman, Sugarbowl, California
Outside, Inside

Top skiers focus on making the outside ski very dominant from the get-go and keeping it that way through the shaping phase, then adding the inside ski toward the exit of the turn to set up early weight transfer. Watch Ted Ligety. His inside ski acts as an inrigger while the outside ski does most of the carving. Simply put, start the turn on the outside ski and finish it with the inside ski. The outside ski is the rider; the inside ski is the decider.








20150313-skitest-256.jpg


Photo by: Keri Bascetta


Shrem White, Smugglers’ Notch, Vermont
Shin To Win

Rather than focusing on standing on the outside ski, notice what you’re doing with the inside ski. You need to feel your shin in the uphill corner of your inside ski boot. The steeper the hill, or faster the speed, the more you need to focus on actively bending your inside leg at the knee and ankle, so you can feel the shin in the corner. Otherwise, that inside foot slips ahead of your hips and you start your next turn on the heel.


Shades Of Carve








20150313-skitest-236.jpg


Photo by: Keri Bascetta


Jeff Harriman, Beaver Creek, Colorado
The Pure Carve

Many skiers believe they are carving just because they are on a “carving ski.” But in a true carved turn, the tails of both skis follow in the same tracks as the tips, with no skidding.


Widen Your Stance








ski0116_carve3r1.jpg


Photo by: Jonathan Selkowitz


Ben Powers, Middlebury Snowbowl, Vermont
Speed And Space

You’ll need skis with sharp edges. Boots should fit well for maximum feel and be fairly stiff. Ski with your weight forward; the fronts of your skis do the bulk of the work. Distribute your weight almost evenly between skis, with perhaps 60 percent of it on your downhill edge. And give yourself room to let it rip. It takes a bit of speed to bend a ski.








20150313-skitest-249.jpg


Photo by: Keri Bascetta


Ole Retlev, Deer Valley, Utah
Most Never Will

It’s the most effortless way of skiing: put the ski on an edge and let its design take care of the rest. Most recreational skiers will never learn. They don’t have the right stance and balance. But they’re still having plenty of fun.








20150313-skitest-273.jpg


Photo by: Keri Bascetta


Tom Burch, Vail, Colorado
Phil-Like Arcs

A Keystone instructor who was an early Elan SCX convert used it in the weekly instructors’ race and beat Phil Mahre. Phil was so incredulous he immediately tried it. Stuff like that was happening all over the country in the 1990s, changing the perception that shaped skis were only for beginners.


Off-Piste, Less Edge








20150313-skitest-342.jpg


Photo by: Keri Bascetta


Steven Brown, Sun Valley, Idaho
Cheap Thrill

Carving can be the best sensation in skiing: feeling the forces build up through your feet, accelerating across the fall line in complete control. And you don’t have to wait for the rare gift of powder. You can experience that awesome feeling every day.


Tip Them Together








20150313-skitest-252.jpg


Photo by: Keri Bascetta


Stephen Barry, Stowe, Vermont
A Downside Of Wide Skis

People are actually getting worse at carving because of wider skis, which are great for deeper snow but are
a detriment to learning to carve.


Speed Control


Most skiers twist their skis at the top of the turn, skidding to control speed. Instead, use turn shape to control speed, with round turns that go across rather than down the hill.








ski0116_carve1b.jpg


Photo by: Keri Bascetta


Eriks Grivins, Lost Trail Powder Mountain, Montana
Carve Snobs

We tend to mock those unsmiling carved-turn elitists because we don’t understand that they can have controlled fun on groomed snow going really fast yet not show it. But yes, they sometimes sneer at those who do not possess carving skills.








ski0116_carve4.jpg


Photo by: Scott Markewitz


Marylu Cianciolo, Chicago Snow Studio, Illinois
Upper-Body Stability

Instructors and students often think the key to carving is just tipping the skis on edge. Beautiful carved-turn skiing also requires the ability to turn with your legs under a solid core and stable hips that face downhill.








20150313-skitest-352.jpg


Photo by: Keri Bascetta


Josh Mondry, Aspen, Colorado
Progression

True carving
is a difficult skill. Start with simple carved arcs, one arc at a time, until you can tip your skis simultaneously, balance on your edges, and make a clean arc. Then move to “railroad tracks” on gentle terrain until you can make continuous linked turns. Then take it to progressively steeper terrain, increasing the tipping movements and widening the turns.








20150313-skitest-347.jpg


Photo by: Keri Bascetta


Celia Enos Perillo, Waterville Valley, New Hampshire
A Common Delusion

I just had this conversation with a longtime skier who thinks he’s carving. He’s not. As we rode the lift,
I pointed out skiers who were also not carving. Which was all of them. He finally concluded with this statement: “I define carving differently than you do.” Then he said carving is “different” from when he learned. Believe me, he’s probably never carved a single turn.








20150313-skitest-361.jpg


Photo by: Keri Bascetta


Alfred Jackson, Tyrol Basin, Wisconsin
Once You Get It...

Only once you’ve experienced a carved turn can you realize the importance of knowing how and when to put your skis up on edge. Most intermediate skiers have never felt the sensation, so they can’t figure out what the fuss is about. Once we can trick a student into letting go and relying on his edges and sidecut to turn, everything else we teach begins to make sense.








20150313-skitest-555.jpg


Photo by: Keri Bascetta


Steve Ikeda, Kirkwood, California
The Edging Spectrum

Carving is the extreme end of the spectrum of edge control that starts with skidding and moves through smearing to carving. If you can’t carve, you’re not an expert. You might be able to flail your way down the steepest runs, but if you can’t set an edge, you’re not quite there yet.


Break The Skidding Habit








ski0116_carvepow.jpg


Photo by: Blake Jorgenson


Alain Bertrand, Chamonix, France
Au Contraire

Carving is of little practical use, an overblown fad that hurts ski schools’ business, as 90 percent of our students simply ask for a brake and a steering wheel. Carving is extolled by racers, whose purpose is to go fast and straight. Recreational skiers, whose purpose is to check speed and turn at a whim, have been led to think of it as the turn.








20150313-skitest-597.jpg


Photo by: Keri Bascetta


Sam Tollett, Boston Mills, Ohio
The Garland Drill

A lot of people think they’re carving but are not. They think they have a nice edge angle, but they’re just stuck at the boundary between the skid and the beginning of carved turns. One drill I like to use with my students is the garland. Glide across the hill engaging and releasing your edges, going down the slope just enough to keep moving. Your tracks will look like a garland on a Christmas tree.








ski0116_carve1a_r1.jpg


Photo by: Keri Bascetta


Michael Rogan, Portillo, Chile and Heavenly, California
Tip, Don’t Steer

Think first about tipping your skis from edge to edge, which is done with the feet and ankles, rather than changing the direction they’re pointed by using lots of upper-body twisting. If you change where the ski is pointed on the face of a clock, that denotes twisting and steering and pivoting. Instead, leave it at 12 o’clock and concentrate on tipping rather than twisting.








20150313-skitest-650.jpg


Photo by: Keri Bascetta


Paul Geoghegan, Ski Bradford, Massachusetts
Minimal Effort

The sweet spot in all sports is the maximum achievement with the least effort. Think of your perfect golf or tennis shot. It’s effortless. Carving gives you maximum exhilaration with the least effort, and it allows skiers to achieve at a high level late in life. You might not be able to ski bumps into your 70s, but you will be able to carve.








ski0116_carve2a_r2.jpg


Photo by: Keri Bascetta


Tim Carbone, Okemo, Vermont
Breaking The Habit

A wide stance helps. Try to stay off the tails of your skis. Strive for high edge angles and good upper/lower body separation through hip angulation. Breaking ingrained habits can be hard, but the rewards are awesome.



https://flipboard.com/@pahi6times/ski-ck84hdisz/25-tips-to-carve-a-ski/a-c-VJypTOQU6l0NMQJjkAcg%3Aa%3A52473004-84e3117a74%2Fskinet.com








  • Like 5

Make Parnassos Great Again!

Share this post


Link to post
Share on other sites

Μια μικρή παρατήρηση μόνο: οι τεχνικές που αφορούν τον Ligety δεν είναι εφαρμόσιμες (ούτε έχουν πολύ νόημα) από τους περισσότερους (καλούς) σκιέρ εκεί έξω. Πολλές φορές, δε, προκαλείται πρόβλημα και αντίθετο αποτέλεσμα.


Landesskilehrer, Wiener Skilehrerverband, Österreich
(Ski Instructor International Level 3)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...